MeiG-SRM900 Multi-mode 5G/LTE Smart Module - SATRON electronics

MeiG Smart SRM900
Multi-network smart 5G/LTE module, supporting axready Wi-Fi, LGA package

MeiG Smart SRM900
Multi-network smart 5G/LTE module, supporting axready Wi-Fi, LGA package
  • Support 5G NR sub-6Ghz,DL 4 × 4 MIMO SA/NSA mode and UL 2 × 2 MIMO SA mode
  • Support 2x2 MU MIMO Wi-Fi, ax ready
  • AI support V66A 16/16/512KB 1.2GHz+Dual HVX
  • Support dual-screen display and dual-touch control; main screen supports up to 2520*1080 @60fps; auxiliary screen supports QHD @60fps Display-Port
  • Support 3-way camera, up to 4-way camera
  • GPS L1+L5 dual-frequency positioning, to meet the fast and accurate positioning in different environments
  • Support 4K @30fps video recording and playback

MeiG Smart SRM900 series core board adopts SM6350 of Qualcomm Snapdragon 5G series. Its CPU adopts 8nm FinFET with 64bit ARM V8 core, Kyro CPU 560 (2 * A77 2.0 GHz&6 * A551.7 GHz) with Adreno GPU 619 and V66A 1.2GHz+Dual HVX, and can carry higher AI calculation algorithm, supporting up to 4K 30fps decode/encode and H.265. It carries android 11 system, supports 64GB+6GB(128GB+8GB) board memory, 5G NR sub-6Ghz, DL 4x4 MIMO, UL 2x2 MIMO, NSA and SA, integrates L1+L5 GPS, 2x2 MIMO and ax ready WIFI broadband smart cellular modules.

SRM900 integrates rich functional interfaces, including LCM, touch screen, camera, microphone, speaker, UART, USB, I2C, SPI interface, etc. It can provide Voice, SMS, address book, 2x2 MIMO WiFi, BT and GPS functions. This product supports dual 16 million 3D camera and DOF camera, and can be widely applied to POS cash registers, logistics terminals, VR camera, intelligent robots, automobile equipment, intelligent information acquisition equipment, intelligent handheld terminals and other products of 5G network.

Frequency Band

SRM900-C:
5G-NR: N1/N28/N41/N78/N79 LTE-FDD: B1/B3/B5/B8
LTE-TDD: B34/B38/B39/B40/B41

SRM900-E:
5G-NR: N1/N3/N20/N28/N78 LTE-FDD: B1/B3/B5/B7/B8/B20 LTE-TDD: B38/B40/B41

SRM900-J:
5G-NR: N1/N3/N77/N78/N79
LTE-FDD: B1/B3/B8/B9/B19/B26/B28 LTE-TDD: B41

SNM930:
Wi-Fi & BT only

Other region:
TBD

Audio & Video

Supports  VoLTE  ultra  HD  voice  calls,  SRVCC/CSFB voice drop technology
24-bit/192kHz Hi-Fi music playback Video codec:
Decode: 4K@30fps 10-bit;
Encode: 4K@30fps 8-bit;
Concurrency: 4K@30 decode+1080P@30 encode

Display Interface

2520x1080@60fps + QHD60 via Displayport One 4-lane DSI, D-PHY 1.2, C-PHY 1.0
DisplayPort support over USB Type-C

Touch Screen Interface

I2C capacitive touch screen

Camera Interface

4 x 4-lane CSI
Support 3 × ISP 14 bit + 1 × lite ISP: 16 + 16 + 16 MP 32MP, 30ZSL with dual ISP

Audio Interface

Analog output: speaker, earpieces, earphone Analog input: 3xmicrophone, 1 x noise reduction microphone

USB Interface

USB3.0*1, support QC4.0, USB OTG

Antenna Interface

Main antenna*4, GNSS antenna*1, Wi-Fi & BT antenna*2

Other Interfaces

I2C: x 5
(U)SIM: x 2 (1.8V/2.95V)
UART: x 3  (support hardware flow control, up to 4Mbps)
SD Card: x 1(Support SD 3.0, 4-bit SDIO)
PWRKEY: 1.8V, Internal pull-up
SPI:  x 2(one can be multiplexed as UART, one can be
multiplexed as I2S) ADC:  x 2
GPIO: x 19
Motor driver:x 1
Flashlight:x 2
LED: x 4

Outstanding Features

WLAN:2.4G/5G, 2x2 MU MIMO, 802.11 a/b/g/n/ac, 11ax ready BT:  BT2.1+EDR/3.0/4.1 LE/5.x BLE
GNSS:  GPS/GLONASS/BeiDou, L1+L5GPS
Modem:
3GPP Rel.15 5G NR
sub-6GHz 5G NR
256 QAM uplink/downlink in sub-6GHz Rel.15 LTE multi-mode modem
Built-in charge IC and fuel gauge, Support Qualcomm Quick Charge 4.0
Support dual screen display and dual touch Support DSDS
Firmware upgrade via USB

General Features

OS: Android 11 Storage:
64GB UFS+4GB LPDDR4x (default) 128GB UFS+6GB LPDDR4x (optional) 128GB UFS+8GB LPDDR4x (optional) Working Temperature:-30°C ~ +75°C
Storage Temperature: -40°C ~ +90°C
Working Voltage: 3.5V~4.35V (typical value: 3.8V) Size: 47.0mm × 48.0mm × 3.0mm
Package: LGA
Weight:about 13.0g

Certification

CCC