MeiG-SRM700 Multi-Mode 5G/LTE Smart Module - SATRON electronics

MeiG Smart SRM700
Multi-mode 5G Smart Module Support Wi-Fi 6E & L1+L5 GNSS

MeiG Smart SRM700
Multi-mode 5G Smart Module Support Wi-Fi 6E & L1+L5 GNSS
  • Support 5G NR sub-6Ghz, DL 4 × 4 MIMO SA/NSA
  • Support WIFI 6E, 2x2 MIMO
  • Support FHD+ (1080x2520) @ 90/120Hz
  • Dual cameras: 16+16 MP@ 30 fps
  • Integrated GPS L1+L5 for fast and accurate positioning in different environments
  • Support 1080p@ 60fps video en/decode
  • Rich interfaces: USB / GPIO / SPI / UART / ...
  • Lifecycle can last until 2030

The MeiG Smart SRM700 adopts the Qualcomm 5G SoC QCM4490 platform, featuring an 8-core Kryo™ CPU (2 Gold A78 cores at 2.4GHz and 6 Silver A55 cores at 2.0GHz) with a 4nm FinFET process, Adreno™ 613 GPU, OpenGL ES 3.2, Vulkan 1.x, OpenCL 2.0, and DX FL12. It supports 1080p@60fps video encoding and decoding with H.264/H.265. The device runs on the Android 13 operating system, with built-in configurations of 64GB+4GB, 128GB+8GB, or 256GB+12GB. It supports 5G NR sub-6GHz, DL 4x4 MIMO, UL 256QAM, NSA and SA, integrated L1+L5 GPS, 2x2 MIMO WiFi 6E, and Bluetooth 5.2.

The SRM700 integrates a variety of functional interfaces, including LCM, touch screen, camera, microphone, speaker, UART, USB, I2C, SPI, and PCIe. It supports voice, SMS, address book, and is widely applied in 5G video recorders, smart cockpits, intelligent POS cash registers, logistics terminals, VR cameras, smart robots, video surveillance, security surveillance, intelligent information acquisition, intelligent handheld terminals, drones, and other products.

Frequency Band

SRM700-C:
5G-FDD: N1/N3/N5/N8/N28
5G-TDD: N41/N78/N79
LTE-FDD: B1/B3/B5/B8
LTE-TDD: B34/B38/B39/B40/B41
WCDMA: B1/B8 CDMA: BC0

SRM700-E:
5G-FDD: N1/N3/N5/N8/N20/N28
5G-TDD: N38/N40/N41/N77/N78/N79
LTE-FDD: B1/B3/B5/B7/B8/B20/B26/B28
LTE-TDD: B38/B40/B41
WCDMA: B1/B5/B8

SNM700:
Wi-Fi & BT only

Multimedia Information

Video en/decode:
• Decode: 1080P@60fps H.264/H.265/VP9
• Encode: 1080P@30fps H.264/H.265
• Concurrency: 1080p30 decode + 1080p30 encode

Display Interface

• FHD+(1080x2520)@ 60/90/120 Hz
• One 4-lane DSI

Camera Interface

• 3 x 4-lane CSI D-PHY 1.2 or C-PHY 1.2
• 16 + 16 MP/25 MP @ 30 fps

Touch Screen Interface

• I2C capacitive touch screen

Audio Interface

• Analogue output: speaker, earpieces, earphone
• Analogue Input: 3 x microphone,1x noise reduction microphone
• Digital Interface: 2 x MI2S 3 x DMIC USB Interface
• 1 x USB 3.1 Gen1, support USB OTG

USB Interface

• 1 x USB 3.1 Gen1, support USB OTG

Antenna Interface

Main antenna×4, GNSS antenna×1, Wi-Fi&BT antenna×2

Other Interfaces

• I2C interface: x5
• (U)SIM interface: x2 (1.8V/2.95V)
• UART interface: x3 (support hardware flow control, the highest rate up to 4Mbps)
• SD card interface: x1 (support SD 3.0, 4-bit SDIO,dual-voltage)
• SPI interface: x2
• ADC interface: x2
• GPIO interface: x19
• PWRKEY: 1.8V, internal pull up

Outstanding Feature

• WLAN: WIFI 6E(2 × 2 MU-MIMO 802.11a/b/g/n/ac/ ax)
• BT: BT5.2
• GNSS: GPS/GLONASS/BeiDou, L1+L5 GPS

  • • Modem:
    •  
    • 3GPP 5G Rel.16
    • sub-6 GHz 5G NR
    • Sub-6: 256 QAM

• Support DSDS
• Firmware upgrade via USB

General Feature

OS: Android 13

Storage

64GB UFS+4GB LPDDR5(separation)(default)
128GB UFS+8GB LPDDR5(separation)(optional)
256GB UFS+12GB LPDDR5(separation)(optional)

Work temperature: -30°C ~ +75°C
Storage Temperature: -40°C ~ +90°C
Work voltage: 3.5V~4.35V (typical value: 3.8V)
Size: 47.0mm × 48.0mm × 3.0mm
Package: LGA
Weight: 13.0g
Certification CCC*/CE*