4G Modules | LTE Cat 4 Module Quectel EG95 - SATRON electronics

LTE Cat 4 Module Quectel EG95

  • LTE Cat 4 Module Quectel EG95
  • LTE Cat 4 Module Quectel EG95
LTE Cat 4 Module Quectel EG95
  • LTE category 4
  • LGA Package
  • Embedded Abundant Protocols
  • 25.0 × 29.0 × 2.25 mm

Quectel EG95 is a series of LTE category 4 module optimized specially for M2M and IoT applications. Adopting 3GPP Rel. 11 LTE technology, it delivers 150Mbit/s downlink and 50Mbit/s uplink data rates.

EG95 is fallback pin-to-pin compatible with Quectel UMTS/HSPA+ UG95 and UG96 modules. This makes it backwardcompatible with existing EDGE and GSM/GPRS networks, ensuring that it can easily migrate from 2G/3G to 4G networks.

A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB drivers for Windows XP, Windows 7/8/10, Linux, Android) extend the applicability of the module to a wide range of M2M and IoT applications such as industrial router, industrial PDA, rugged tablet PC, video surveillance, digital signage, and so on.

Key benefits

  • LTE category 4 module optimized for M2M and IoT applications
  • Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage
  • Compact SMT form factor ideal for size-constrained applications with extended operation temperature range
  • Embedded power management unit (PMU) featuring ultra-low deep-sleep current consumption
  • Simple migration from 2G/3G to 4G with a flexible and scalable platform

General Characteristics

  1. Frequency BandsEG95-E:LTE FDD: B1/B3/B7/B8/B20/B28*WCDMA: B1/B8GSM: 900/1800
  2. LTE Version3GPP E-UTRA Release 11
  3. Bandwidth1.4/3/5/10/15/20MHz
  4. AntennaSupports Rx-diversity
  5. Supply Voltage Range3.3V ~ 4.3V, 3.8V Typ.
  6. Operation Temperature-40°C ~ +85°C
  7. Size L/W/H (mm)25.0mm x 29.0mm x 2.25mm
  8. PackageLGA
  9. WeightApprox. 3.8g
  10. Control via AT commands3GPP TS27.007 and enhanced AT commands

Specifications

  1. DataLTE:LTE FDD: Max 150Mbps (DL) Max 50Mbps (UL)
    DC-HSPA+:Max 42Mbps(DL) Max5.76Mbps(UL)
    UMTS:Max 384Kbps(DL) Max 384Kbps(UL)
    EDGE:Max 236.8Kbps(DL) Max 236.8Kbps(UL)
    GPRS:Max 85.6Kbps(DL) Max 85.6Kbps(UL)
  2. VoiceSpeech Codec Modes:HR, FR, EFR, AMR, AMR-WB<
    Echo Arithmetic:Echo Cancellation, Noise Reduction
  3. eCallAccident, Emergency Services
  4. VoLTEDigital Audio and VoLTE (Voice over LTE) (Optional)
  5. ProtocolsTCP/ UDP/ PPP/ FTP/ HTTP*/ SMTP*/ MMS/ NTP/ PING/ DTMF*/ FILE*/ CMUX/ QMI

Special Features

  1. DriversUSB Serial:Windows XP, Windows 7/8/10, Linux 2.6 or later, Android 2.3/4.0/4.2/4.4/5.0/6.0
    RIL:Android 4.0/4.2/4.4/5.0/6.0
    NDIS:Windows XP, Windows 7/8/10
    ECM:Linux 2.6 or later
    Gobinet:Linux 2.6 or later
    Linux qmi wwan:Linux 3.4 or later
  2. DFOTA*Delta firmware upgrade over the air

Electrical Characteristics

  1. Output PowerClass 3 (23dBm±2dB) for LTE FDDClass 3 (24dBm+1/-3dB) for UMTSClass E2 (27dBm±3dB) for EDGE 900MHzClass E2 (26dBm+3/-4dB) for EDGE 1800MHzClass 4 (33dBm±2dB) for GSM 900MHzClass 1 (30dBm±2dB) for GSM 1800MHz
  2. Consumption15uA @Power off2.6mA @Sleep, Typ.21mA @Idle
  3. SensitivityLTE FDD B1: -98.5dBm (10M)LTE FDD B3: -98.4dBm (10M)LTE FDD B7: -97.2dBm (10M)LTE FDD B8: -97.5dBm (10M)LTE FDD B20: -97.3dBm (10M)UMTS B1: -110.5dBm (10M)UMTS B8: -110.4dBm (10M)GSM: -109.4dBmDCS: -110dBm

Interfaces

  1. USB 2.0 DeviceHigh Speed, 480Mbps
  2. PCM×1, Digital Audio through PCM Interface (optional)
  3. USIM×2, 1.8V/3V
  4. NETLIGHT×1
  5. UART×2 (Main UART and Debug UART)
  6. RESET
  7. PWRKEY
  8. Antenna×2 (Main antenna interface and Rx-diversity antenna interface)
  9. ADC×1
  • * Under development
Similar products