ADATA Memory Module DDR3L-1600(CL11) 204-Pin SO-DIMM(W) 4GB (1024M x 64-bit) - SATRON electronics

ADATA Memory Module DDR3L-1600(CL11) 204-Pin SO-DIMM(W) 4GB (1024M x 64-bit)

ADATA Memory Module DDR3L-1600(CL11) 204-Pin SO-DIMM(W) 4GB (1024M x 64-bit)
  • Wide Temperature Operability: -40ºC to 85ºC
  • Designed for optimized performance and reliability
  • Every IC is verified by strict quality controls
  • Low power consumption provides high efficiency
  • Fast transmission bandwidth
  • RoHS compliance

The ADATA’s module is a 1024Mx64 bits 8GB(8192MB) DDR3L-1600(CL11)-11-11-28 SDRAM memory module. The SPD is programmed to JEDEC standard latency 1600Mbps timing of 11-11-11-28 at 1.35V. The module is composed of sixteen 512Mx8 bit CMOS DDR3L SDRAMs in FBGA package and one 2Kbit EEPROM with temperature sensor in 8pin TDFN package on a 204pin glass–epoxy printed circuit board.
The module is a Dual In-line Memory Module and intended for mounting onto 204 pins edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operating frequencies, programmable latencies and burst lengths allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.

Features:

  • Power supply (Normal): VDD & VDDQ = 1.35V(1.283V-1.45V)
  • Backward compatible for VDD = 1.5V ± 0.075V
  • 1.35V (SSTL_15 compatible) I/O
  • MRS Cycle with address key programs
  • CAS Latency (5,6,7,8,9,10,11)
  • Burst Length (BL):8 and 4 with Burst Chop(BC)
  • Bi-directional, differential data strobe (DQS and /DQS)
  • Differential clock input (CK, /CK) operation
  • DLL aligns DQ and DQS transition with CK transition
  • Double-data-rate architecture; two data transfers per clock cycle
  • 8 independent internal bank
  • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ:240 ohm±1%)
  • Auto refresh and self refresh
  • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE ≤95°C
  • Commercial Temperature( 0°C ~ 85 °C)
  • Industrial Temperature( -40°C ~ 95 °C)
  • 8-bit pre-fetch.
  • On Die Termination using ODT pin.
  • Lead-free and Halogen-free products are RoHS Compliant
  • On-board I2C integrated serial presence-detect (SPD) EEPROM with temperature sensor.